Unlock That iPhone!

Pre-assembled KIT, including the dock USB charger connector port with flex cable + Mic + Buzzer Ringer or Loud Speaker + Antenna sticker, all OEM parts pre-installed, this whole kit go into the back housing below the main board and battery. You will need to open up the phone, remove the two screws at the dock charger ports, take out the whole old kit, then just drop this new kit back in, put back screws and the replacement work for any of this part is done. Compatible: Apple iPhone 3G 8gb 16gb Black or White. provided by AT&T or by any other wireless carriers.  NOTE :  will not compatible with the new / latest iphone 3gS.

Original home or menu button flex cable replacement part. Including only the flex cable, not including the top plastic home button.  If you press the home/menu button and no response hen this is the correct replacement part for your 3gS, or just change out the old flex if you just want to get a fresh new function home/menu button.   Compatible : Apple iPhone 3gS 16gb or 32gb any colors provided by AT&T or unlocked with other carriers.

Oem replacement parts assembled kit, use for repairing your iPhone 3gS ( not for 3g ) USB charging dock connection problem, antenna not receiving signals, microphone does not work, loud speaker distorted / broken.  All these parts usb charging dock flex + microphone + buzzer ringer or loud speaker + antenna are pre-installed ready for your repair works.  Compatible :  for iPhone 3gS only ( will not work with iPhone 3g ).

Special skill and techniques required for proper installation. Think twice before you disassemble your iPhone!

Compatible with: AT&T Apple iPhone 3G S 3rd Gerenation, iPhone 3G 2nd Gerenation

Compatible with: AT&T Apple iPhone 3G S 3rd Gerenation, iPhone 3G 2nd Gerenation

Compatible with: AT&T Apple iPhone 3G S 3rd Gerenation, iPhone 3G 2nd Gerenation

Compatible with: AT&T Apple iPhone 3G S 3rd Gerenation, iPhone 3G 2nd Gerenation

Crystal Clear Flex Hard Back Cover Case: Brand new non-OEM. Durable clear flexible plastic material. Custom made to fit your iPod perfectly. Easy access to all buttons and features. Plug your charger, cable or headset without removing the case. Easy installation, just snap on your ipod without any tools. iPod not included. Does not fit Touch 1st Generation LCD Screen Protector: Brand new generic screen protector. Clear, ultra thin and durable. Custom designed to fit your PDA/Smartphone. Shield and protect your screen from unwanted scratches. Quickly and easily adhere directly to your screen. Non-adhesive backing, will not leave sticky residue. Include a cloth, soft card & 1 screen protector. Phone not included. UPC Code:088515742165

Main iPhone 3gS LCD glass screen cover + digitizer / touch screen with flex cable and connector. Front face panel repair replacement, replace your broken / damaged / cracked / shattered outside lens glass cover; If you have a cracked / broken glass but your LCD still display normal and your touch screen function may or may not working properly then this is the correct replacement part. Also, included TWO pre-cut 3M adhesives and all the tools you need, you must have these adhesives to mount your front touch panel back together. * Link Installation guides step by step with pictures INCLUDED. Guide including tips to do and don't to avoid damages to your phone during installation. Compatible: Apple iPhone 3gS 16GB 32GB provided by AT&T, T-Mobile or by any wireless carriers.

Main iPhone 3G LCD glass screen cover + digitizer touch screen with flex cable and connector. Front face panel repair replacement, replace your broken / damaged / cracked / shattered outside lens glass cover. If you have a cracked / broken glass but your LCD still display normal and your touch screen function may or may not working properly then this is the correct replacement part. Also, included TWO pre-cut 3M adhesives, you must have these adhesives to mount your front touch panel back together, 3M brand adhesives known for its highest quality, perfect fit. Also including 2 pieces plastic pry tool. Link Installation guides step by step INCLUDED. Compatible: iPhone 3G GPS 8GB 16GB any color.

Full Complete top front glass touch screen panel repair / replacement Kit : including are all parts pre-installed assembly kit including the top glass with digitizer / touch screen function, ear speaker part with flex cable, top plastic home button and bottom home button pad sensor with flex cable, all parts pre-installed on the frame; Including the tools so you can open up the top front panel, lift up the flex cable connectors, pull off the LCD assembly (not included), then slide the LCD assembly into this top front glass frame assembly and now you are ready to re-connect the flex cable connectors back to the main board, screw everything back and your repair / replacement work is done.  Also including to our WirelessFinest link to installation guide step by step with picture. Compatible : Apple iPhone 3G 16gb or 32gb (will NOT compatible with iPhone 3gS or first generation iPhone 2g)

If you have a cracked glass screen on your iPhone 3g, your touch screen function may or may not working properly, then this is the correct replacement part. Best quality repair part that will give you the best performance and also the touch function will work same as new. Also including is the right tool for this repair works plus guide step by step with picture link, and hint / tips you should Do or Don't during the installation to avoid damages. Come with two pre-cut 3M adhesives, you must have these adhesives to mount your front touch panel back together. Compatible: iPhone 3G 8GB 16GB either colors.  

Full Complete top front glass touch screen panel repair / replacement Kit : including are all parts pre-installed assembly kit including the top glass with digitizer / touch screen function, ear speaker part with flex cable, top plastic home button and bottom home button pad sensor with flex cable, all parts pre-installed on the frame. The frame also has the built-in rubber seal line that go around the screen. Including the tools so you can open up the top front panel, lift up the flex cable connectors, pull off the LCD assembly (not included), then slide the LCD assembly into this top front glass frame assembly and now you are ready to re-connect the flex cable connectors back to the main board, screw everything back and your repair / replacement work is done. Also including to our WirelessFinest link to installation guide step by step with picture. Compatible : Apple iPhone 3g 16gb or 32gb (will NOT compatible with iPhone 3g or first generation iPhone 2g).NOTE : Please always use a professional repair service or expert for your repair works, WirelessFinest will not be responsible for damages due to improper installations.

Pre-assembled KIT, including the dock USB charger connector port with flex cable + Mic + Buzzer Ringer or Loud Speaker + Antenna sticker, all OEM parts pre-installed, this whole kit go into the back housing below the main board and battery. You will need to open up the phone, remove the two screws at the dock charger ports, take out the whole old kit, then just drop this new kit back in, put back screws and the replacement work for any of this part is done. Compatible: Apple iPhone 3G 8gb 16gb Black or White. provided by AT&T or by any other wireless carriers.  NOTE :  will not compatible with the new / latest iphone 3gS.

The Otterbox For Apple Iphone 3G Defender Series Case Is Stylish And Slim In Design/ While Still Offering Unparalleled Protection Against Harmful Drops/ Bumps/ Shocks/ Scratches/ Dings And Dust.

Protect your technology investment when your budget is already tight with the ruggedized OtterBox Defender case for iPhone 3G and iPhone 3GS. The Defender series offers a fully interactive case that enables complete usability of the iPhone's touchscreen and access to all buttons. And you can sync and charge your iPhone right through the case. This Defender case also comes with an OtterBox ClipStand holster-style swivel belt clip. The OtterBox Defender for iPhone 3G/3GS in black. With the included swivel belt clip. Ideal for frequent travelers and business professionals as well as everyday users who want added protection, OtterBox Defender cases provide three layers of bump, scratch and drop protection: Layer 1: Thermal formed protective clear membrane to safeguard screen and keyboard against scratching as well as dust and dirt. Layer 2: Hi-impact polycarbonate shell. Layer 3: Silicone skin absorbs bump and shock and includes innovative retaining features to hold it in place. Features Accommodates Apple iPhone 3G and iPhone 3GS models Open access to sync/charge and headphone jacks Use of all buttons accessible through case Added bump, drop, and shock protection Sleek, slim fit to Apple device Open access to speakers, microphone and camera Includes holster style swivel belt Sound transmits through case Environmental Protection Drop and Shock: Protection against drop, bump and shock Water Protection: Not tested or recommended for water protection Dust Protection: Dust does not enter in a sufficient quantity to interfere with satisfactory operation of equipment

Use these screws for replacement the missing or rusted or damaged screws in your iPhone 3g or 3gS any version. Same size and shape as the screws in your phone. High quality repair replacement screws set. Also including are 5 pieces pre-cut adhesives strips to cover the scews on the frame. Custom retail packaging included.

This is the mid frame or chassis bezel that would hold the glass + digitizer on, come ready with the 3M adhesives pre-installed ready for you to install the replacement part hassle free, also the frame have the built in perfect seal rubber line that go around the frame or the glass.Compatible : Apple iPod Touch 2 / iTouch 2nd generation, will NOT compatible with the iPod Touch 1 / iTouch 1st generation.

Combo Kit including two items : to replace your broken / damaged iPhone 3g LCD, you will need to remove the LCD assembly which including the LCD and the metal mounting plate with correct screw holes available so you can screw back this LCD metal frame assembly.  Use this kit to avoid messy extra steps you have to do that could damage the device, save you a lot of times.  OEM replacement parts so it will be perfect fit. Item 1 :  OEM Main LCD screen display with flex cable and adhesives ready in the back to mount on the metal plate ( item 2 ) Item 2 :  OEM metal mounting plate with side rails and available screw holes to mount the LCD and the assembly back into the phone. Compatible : Apple iPhone 3G 8gB or 16gB any color provided by AT&T or by any other wireless carriers.  NOT compatible with the iphone 3gS.